Specifications:

• Welder—DC Stick 40 - 250 amp - 225 amp 60% duty cycle
• Generator—5000 watt continuous, 60 Hz (while not welding)
• One 120 volt, 20 amp duplex outlet
• One 120 volt, 30 amp twist lock outlet
• One 240 volt, 20 amp twist lock outlet
• Air Compressor—Single stage 23 CFM @ 100 PSI, 150 PSI max.
• Jump Starting—12 volt nominal, 700 amp, 24 volt nominal, 400 amp
• Engine—Electric start, air cooled Kohler Command OHV V-Twin
• Dimensions—Unit with fuel tank: 38in.W x 50in.D x 25in.H
• Control box: 18in.W x 5in.D x 12in.H
• Bottom of unit to bottom to control box: 10in.
• Weight—850 lbs.
• Includes 6 gallon side mount fuel tank (removable)
• Optional 13 gallon back mount fuel tank changes overall dimensions to: 42in.W x 46in.D x 26in.H

Features:

• DC Welding
• CC stick
• 25 ft. 1/0 gauge welding cables included
• AC Power
• Synchronous, brushless AC generator
• Limited AC output while welding
• Air Power
• CFM rated at 100 PSI, 150 PSI max.
• Air gauge on control panels monitors air tank pressure
• Air tank required (not included)
• Jump Starting
• Voltage regulator with reverse polarity protection controls output voltage to a safe level for today's electronics
• Surge protection with Antizap provides safer boosting
• Polarity and low battery LED indicators confirm proper connections
• 12 volt nominal, 700 amp
• 24 volt nominal, 400 amp
• 30 ft., 1/0 ga. welding cable allows for flexibility and ease of use
• 1000 amp clamps allow maximum amperage output
• Control Panel
• Control panel mounted to unit is standard
• Plug and play feature of control panel for easy remote mounting.
• Requires extension harness for distances beyond 12in.

Available  Options:

• 950-085 6 ft. Control Panel Harness
• 950-086 12 ft. Control Panel Harness
• 950-154 24 ft. Control Panel Harness
• 250-022L 13 Gallon Rear Mount Fuel - Tank Upgrade (factory installed) from standard 6 gallon side mount

• 450-044 50 ft. Boosting Cable Upgrade
• 550-056 30 CFM Air Compressor Upgrade
• 350-087 50 ft. Welding Cable Upgrade

Available Accessories:

• 61-130 30 gallon Vertical Mount Air Tank
• 61-131 30 gallon Horizontal Mount Air Tank
• 50-443 12 gallon Horizontal Mount Air Tank
• NOTE: An Air tank is required (not included)

Installation

• Goodall Power Centers provide for a compact and clean installation. Installation time is reduced and simplified with these easy bolt-in packages, compared to the installation of separate components.
• Center point lift included

GPC Comparison Chart

Model

Welding Amperage (DC)

Air CFM

AC Wattage

Jump Starting Amperage

Power Source

02-000

200

18

4000

NA

Gas Engine

02-050

225

24

5000

NA

Gas Engine

02-500

225

24

5000

NA

Hydraulic

05-000

225

23 (standard) 30 (optional)

5000

700 - 12 volt 400 - 24 volt

Gas Engine