1000 Amps AC/DC Current Clamp Meter
No. GTC-CM1000 |
1000 Amps AC/DC Current Clamp Meter |
1000 Amps AC/DC Current Clamp Meter
|
Features: |
- Clamp opens up to 1 inch (25.4 mm) .
- One rotary switch operation.
- Large 4 digit LCD display.
- AC/DC Voltage measurement up to 600 Volt.
- AC/DC current measurement up to 600 A.
- Relative measurement
- One touch auto zero.
- Peak Hold Function
- Data Hold Function
- Resistance measurement.
- 2 readings per second sampling
- Continuity check with audible indicator.
- Protective hand guard.
- Low battery indicator.
- Auto power off.
- 50 hrs in use battery life.
- Soft carrying deluxe pouch.
- Test leads and batteries included.
|
| CM1000 Applications: |
- Measure currents in circuits like battery chargers, alternators, leakage
currents, electrical loads, etc.
- Check grounds, Voltage drops and continuity across Connectors, Wires,
Cables, Relays Contacts, Lamps, Switches, etc.
- Check components like Alternator, Diodes, Relays Coils, Condensers,
Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches,
Fuses, etc.
- An essential tool for all around troubleshooting of electrical and electronic
circuit and systems.
|
| Ergonomic Features: |
- The new smaller jaws and ergonomic profile compared with other models
makes handling and operation easier and more convenient
- Large easy to read 0.393in. (10 mm) digits display
- Single knob selects functions
- Peak hold function
- Display data hold
- Rugged plastic enclosure
|
| For Use On: |
- Electronic and electrical circuits
- Automobiles
- Trucks
- Trailers
|
- Boats
- RVs
- All 0 to 1000 Volt AC/ DC powered
circuits.
|
| Technical Specifications : |
| General Specifications: |
| Display: |
- 4 Digit LCD (Max. reading 9999)
- 0.393in.(10 mm) Digits
- Units indicator
- Relative measure indicator
- Display data hold indicator
- Peak hold indicator
- VDC/VAC indicator
|
- Continuity indicator
- Automatic over-range indication
- Automatic( - ) negative polarity indicator
- One touch button auto zeroing
- Auto power off
- Low battery indicator
|
Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35-1/2in. long
Physical dimensions: 7.44in. (H) x 2.75in. (W) x 1.33in. (D) - 189mm (H) x 70 mm (W) x 34 mm (D)
Weight: Approximately 7.76 Oz ( 220 g) Including battery
|
| Electrical Specifications: |
DC Voltage: ± 1% ± 2 dgts., 1000 V ac/dc maximum, 1020Vrms overload protection
AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 1000 V ac/dc maximum, 600Vrms overload protection
DC Current: ± 2.5 % ± 10 dgts., 1000 Amp. maximum, 1020Arms overload protection
AC Current: ± 2 % ± 10 dgts., 1000 Amp. maximum, 1020Arms overload protection
Resistance: ±1% ± 3 dgts., 660Vrms overload protection
Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 1000 Ω, max. voltage
test < 3 Vdc. |
|
