a
Automotive Digital Multimeter
No. GTC-CT8025 |
Automotive Digital Multimeter |
Automotive Digital Multimeter
|
Features: |
- State of the Art ergonomic design and styling
for easier handling and use
- Full control manual range selection
- Large 3-1/2 digit LCD display
- AC/DC Voltage measurement up to 600 Volt
- DC Current measurement up to 10 A
- Tachometer function measures from 500 to
10000 rpm
- Dwell measurement from 0 to 120 deg.
- Temperature measurement from -40 deg. C
to 1000 deg. C
- Resistance measurement up to 2 MOhm
- Diode test
- Continuity Test
- Overload protection
- Soft holster for instrument protection
- Auto power off
|
| CT8025 Applications: |
- Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold,
cooling system, air conditioning, heating system, catalytic converter, etc.
- Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position
(TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
- Check grounds, Voltage drops and continuity across Connectors, Wires, Cables,
Relays Contacts, Lamps, Switches, etc.
- Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
- An essential tool for all around troubleshooting of electrical and electronic circuit and
systems.
|
| Ergonomic Features: |
- The smaller and ergonomic profile compared with
previous models makes handling and operation
easier and more convenient
- Single knob selects function and range
- Rugged plastic enclosure
- Soft anti-slip rubber holster protects the instrument
against impacts and chemicals
- Large easy to read 1/2in. (12.5 mm) digits display
- Design allows comfortable hand holding or resting
at convenient places horizontally or at an angle by
using the stand at the back of the holster
|
| For Use On: |
- Electronic and electrical circuits
- Automobiles
- Trucks
- Trailers
|
- Boats
- RVs
- All 0 to 600 Volt AC/ DC powered
circuits.
|
| Technical Specifications : |
| General Specifications: |
| Display: |
- 3-1/2 Digit LCD (Max reading 1999)
- 1/2in.(12.5 mm) Digits
- High Voltage warning indicator
- Automatic( - ) negative polarity indicator
- Automatic Zeroing
- Automatic over-range indication
- Low battery indicator
|
Power source: Standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35-1/2in.
long, K-type temperature probe.
Physical dimensions: 5.51in.(H) x 2.75in.(W) x 1.41in.(D) - 140 mm(H) x 70 mm(W) x 36
mm(D)
Weight: Approximately 12.34 Oz ( 350 g) Including battery
|
| Electrical Specifications: |
DC Voltage: ±0.25% ± 2 dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
AC Voltage: ±1.5% ± 5 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
DC Current: ± 1.0 % ± 3 dgts., Internal 10A/ 250V fuse protection
Diode Test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
Resistance: ±1.0% ± 3 dgts., 250 V ac/dc Overload protection
Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
Temperature: -40 deg. to 400 deg.C (±0.7 + 3 dgts.), 400 deg. C to 1000 deg. C (±1.5 + 10
dgts.)
|
|
