Dual Display Professional Automotive Digital Multimeter
No. GTC-CT8030 |
Dual Display Professional Automotive Digital Multimeter |
| For Use In: |
Electronic and electrical circuits
Automobiles
Trucks
Trailers
|
Boats
RVs
All 0 to 1000 Volt DC powered
circuits
All o to 750 Volt AC powered
circuits |
| Features: |
- State of the Art ergonomic design and styling for
easier handling and use
- Full autorange features
- Large selectable 4¾ or 3¾ digit main display
- 4 digits secondary display
- 42 segments analog bargraph
- DC Voltage measurement up to 1000 Volt
- DC Voltage measurement up to 750 Volt
- AC/DC Current measurement up to 10 A
- Tachometer function with inductive pickup
measures from 30 to 20000 rpm
- Dwell measurement in degrees from 0 to 360º or
duty cycle from 0 to 100%
- Temperature measurement from -20ºC to 1000ºC
or 0º to 1832ºF (selectable ºC or ºF)
- Resistance measurement up to 40 MOhm
- Frequency measurement from 10 to 20 KHz
- Fuel Injection test measures pulse width from 0.05
to 250 mS, or duty cycle from 0 to 100%
- Oxygen Sensor test function
- Alternator test function
- Fault Code Reader
- DTC Decoder
- Diode test
- Continuity Test
- Overload protection
- Soft holster for instrument protection
- Auto power off
|
| CT8030 Applications: |
- Measure engine RPM, ignition dwell angle, and temperature of exhaust
manifold, cooling system, air conditioning, heating system, catalytic
converter, etc.
- Measure output in sensors like Oxygen (O2), Coolant Temperature,
Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow
(MAF), etc.
- Check grounds, Voltage drops and continuity across Connectors, Wires,
Cables, Relays Contacts, Lamps, Switches, etc.
- Check components like Alternator, Diodes, Relays Coils, Condensers,
Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches,
Fuses, etc.
- An essential tool for all around troubleshooting of electrical and electronic
circuit and systems.
|
| Technical Specifications: |
| General Specifications: |
| Display |
- 4¾ digits main display
- 4 digits secondary display
- 42 Segments analog bargraph (20 updates/Second)
- Backlight
- Automatic( - ) negative polarity indicator
- Automatic Zeroing
- Automatic over-range indication
- Low battery indicator
|
Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
Physical dimensions (including holster) :
6.30” (H) x 3.22” (W) x 1.89” (D) - 160 mm x 82mm x 48 mm
Weight: Approximately 12.14 Oz ( 345 g) Including battery
|
| Electrical Specifications: |
- DC Voltage: 0 to ± 1000V, ±0.3% ± 2 dgts., 10MΩ input impedance
- AC Voltage: 0 to 750V, ±2.5% ± 5 dgts., 10MΩ input impedance, 50 to 500 Hz
- DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts.,
- AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.
- Resistance: 0 to 40 MΩ ± 0.8% ± 5 dgts.,
- Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.
- Tachometer: 30 to 20000 RPM, ± 2 RPM
- Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d
- Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d
- Oxygen Test: Measures cross count up to 10/Second
- Alternator Test: Measures output voltage ripple, beeps if ripple exceeds 0.45V
- Fault code reader: Retrieves blink type fault codes
- DTC Decoder: Retrieves Impulse Code Diagnostic Trouble Codes
- Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
- Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
- Temperature: -20º to 1000°C or 0°F to 1832°F (±2% + 1 dgts.)
|
| Accessories Included: |
- Battery: 9 Volt alkaline battery included
- Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II),
35½" long
- Temperature probe: Bead type K thermocouple
- Inductive Pickup for tachometer function
- Hard Storage/Carrying Case: Polypropylene foam padded case
- Soft protective holster
- User Manual
|
| Ergonomic Features: |
- The smaller and ergonomic profile compared with
previous models makes handling and operation
easier and more convenient
- Single knob selects function and range
- Rugged plastic enclosure
- Soft anti-slip rubber holster protects the
instrument against impacts and chemicals
- Large easy to read 1/2" (12.5 mm) digits display
- Design allows comfortable hand holding or resting
at convenient places horizontally or at an angle by
using the stand at the back of the holster
|
|
